Pyronix Euro 46 V10

Panel Connection – Serial RS232

Manufacturer	Pyronix
Model	Euro
Version	46
Minimum DualCom Pro Firmware	DualCom Pro: V2.24 DualCom Pro 2: V2.0.1
Minimum Panel Firmware	V10
Cable required?	Lead Provided with DualCom Pro
Panel Profile	Pyronix-Euro-RS232
Panel Bus Connection	RS232
Technical Notes	On completion of programming the Pyronix requires a reboot to establish the electrical connection to the DualCom Pro

Manufacturer	Panel	Connection	Cable/Plug On	Supplied Cables
Pyronix	Euro	RS232	6 Pin	Green – RTN Blue – RS232-R Red – RS232-T

Enter “Engineer Mode” > Select “Communications” > “Program ARC/SMS”
Select “ARC Details” > Set “Format” to WebWayOne [141] > Set “SIA Ack Char” [006] > Set “SIA
Nack Char” [021]
“Valid Areas” is Engineer’s choice > “Area Accounts” is Engineer’s choice
Set “ARC Account” to “Site ID/Account No” > Set “Redials” [003] > Set “Time Out” [30]
“Test Calls” is Engineer’s choice > “Event Types” is Engineer’s choice
On completion of programming the Pyronix requires a reboot to establish the electrical connection to the DualCom Pro

Go to ‘Set Up Downloading’ > “Set Download” by (WebWayOne) [4]
Set “Poll Timeout” [10] > Set “Modem Init Timeout” [060]
Set “Rings to Answer” [1] > Set “Comm Tx Timeout” [030] > Set “Comm Dial Tmout” [030]
Set “UDL Tx Timeout” [02] > Set “Redials” [03] > Set “Roving Dial” to No [0] > Set “Auto Upload”
to “No” [0]
“UDL Password” is Engineer’s choice > “Site Name” is Engineer’s choice
Go into “Communications Menu” and select “No “until “Advanced Communications” > press
“Yes” until “ARM PC Tel NO.”
Enter 1111
Press YES until Program PC 1 and enter 1111 again